SolarEdge Three Phase Commercial Inverter, USA Domestic Content Eligible
The SolarEdge USE-SIN-USR0IBNS8 is a single part number that becomes one of four three-phase commercial inverter models. The installer selects the power class in the SolarEdge SetApp during commissioning: SE10KUS or SE17.3KUS for 208V grids, or SE30KUS or SE40KUS for 480V grids. SolarEdge notes that the selection is permanent and can only be changed with SolarEdge support.
The inverter is designed to work with SolarEdge C651U commercial power optimizers. Built-in PV rapid shutdown (NEC 2014–2023) and domestic content eligibility both depend on pairing with C651U.
Specifications by power class
| SE10KUS | SE17.3KUS | SE30KUS | SE40KUS | |
|---|---|---|---|---|
| Grid (L-L nominal) | 208 Vac | 208 Vac | 480 Vac | 480 Vac |
| Rated AC power output | 10,000 W | 17,300 W | 30,000 W | 40,000 W |
| AC output voltage L-N (min-nom-max) | 105–120–132.5 Vac | 105–120–132.5 Vac | 244–277–305 Vac | 244–277–305 Vac |
| AC output voltage L-L (min-nom-max) | 183–208–229 Vac | 183–208–229 Vac | 422.5–480–529 Vac | 422.5–480–529 Vac |
| Max continuous output current (per phase) | 27.8 A | 48.25 A | 36.25 A | 48.25 A |
| Max DC power (module STC) | 17,500 W | 30,275 W | 52,500 W | 70,000 W |
| Max input voltage | 600 Vdc | 600 Vdc | 1000 Vdc | 1000 Vdc |
| Operating voltage range | 370–600 Vdc | 370–600 Vdc | 840–1000 Vdc | 840–1000 Vdc |
| Max input current | 27.8 A | 48.25 A | 36.25 A | 48.25 A |
General specifications
| Item | Value |
|---|---|
| AC line connections | 3W + PE, 4W + PE |
| AC frequency | 59.3–60–60.5 Hz |
| Power factor range | ±0.85 to 1 |
| DC inputs | 3 pairs, fuseless |
| Max input short-circuit current | 55 Adc |
| CEC weighted efficiency | Up to 98.5% |
| Night-time consumption | < 4 W |
| Topology | Transformer-less, ungrounded |
| Communications | 2 × RS485, Ethernet, cellular (optional) |
| Arc-fault protection | Integrated, user configurable (UL 1699B) |
| PV rapid shutdown | NEC 2014–2023, built-in when paired with C651U |
| Surge protection | DC and AC Type II, field-replaceable, built-in |
| DC disconnect | Integrated safety switch |
| Safety standards | UL 1741, UL 1741 SA, UL 1741 SB, UL 1699B, CSA C22.2#107.1, Canadian AFCI per T.I.L. M-07 |
| Grid connection standards | IEEE 1547-2018, Rule 21, Rule 14 (HI) |
| Emissions | FCC Part 15 Class A |
| Dimensions with safety switch (H × W × D) | 31.8 × 12.5 × 11.8 in (808 × 317 × 300 mm) |
| Weight with safety switch | 78.2 lb (35.5 kg) |
| Operating temperature | -40 to +140 °F (-40 to +60 °C), derating applies |
| Enclosure / noise | NEMA 3R, user-replaceable fans / < 62 dBA |
| Warranty | 12–20 years per the SolarEdge datasheet; see SolarEdge’s current warranty terms for standard and extended coverage |
Domestic content
SolarEdge lists USE-SIN-USR0IBNS8 as USA Domestic Content Eligible. Eligibility applies when the inverter is installed with qualified USA-manufactured C651U power optimizers in the same project. For this part number SolarEdge’s datasheet states a manufactured-product content of 17.6% under IRS Notice 2024-41 and 24.8% under IRS Notice 2025-08. Whether a project qualifies for a domestic content bonus depends on the whole project; confirm with your tax advisor.
Pricing, availability and ordering
The price shown is CSE Solar USA’s listed price for one inverter (power class set at commissioning). Commercial SolarEdge equipment is confirmed per project: before an order is placed, CSE verifies current availability, lead time and freight to your site. Use Check Availability or contact CSE with your project location, quantities and timeline.
Documentation
- Three Phase Commercial Inverter, USA Domestic Content Eligible – datasheet (North America) (SolarEdge Knowledge Center)
Specifications on this page are taken from the SolarEdge datasheet DS-000246-NAM (April 10, 2025). SolarEdge may update its documentation; always design and install to the latest SolarEdge datasheet and installation guide.
