No products in the cart.
Wholesale Solar Inverter Suppliers: What U.S. Installers Should Compare Before Ordering
If you install or resell solar, the inverter you choose drives everything downstream: string layout, rapid-shutdown method, battery options, interconnection paperwork and your margin. This guide covers what to compare before you place a wholesale inverter order, and how to get a quote from CSE Solar USA that covers equipment, freight and lead time in one place.
1. Match the inverter type to the project
Most wholesale inverter mistakes start with the wrong architecture, not the wrong brand. Narrow the type first, then compare models.
| Project | Inverter types to consider | Browse |
|---|---|---|
| Residential roof, shading or multiple roof planes | Microinverters, or string inverters with module-level power optimizers | Microinverters · Power optimizers |
| Residential with battery backup | Hybrid / battery-based inverters (check the battery compatibility list) | Battery-based inverters |
| Simple residential grid-tie array | Single-phase string inverters | Residential inverters |
| Small commercial, three-phase service | Three-phase string inverters, three-phase microinverters | Commercial inverters |
| Larger commercial and ground-mount | High-power three-phase string inverters (often 480 V) | SMA · SolarEdge |
2. The pre-order checklist
Check each of these against the manufacturer’s current datasheet and installation manual for the exact model number before you order:
- Service voltage and phase. Residential split-phase 120/240 V is not interchangeable with three-phase 208Y/120 V or 480Y/277 V. Many inverters are built for one service type only.
- Grid-interconnection listing. Many U.S. utilities require grid-tied inverters listed to UL 1741, including Supplement SB, which tests to the IEEE 1547-2018 grid-support requirements. Manufacturers state these listings on the datasheet (for example, Enphase’s IQ8P-3P datasheet lists “IEEE 1547 (UL 1741-SB)”). Check what your utility’s interconnection rules require for your project.
- Rapid shutdown. PV systems on buildings must meet the rapid-shutdown rules of NEC (NFPA 70) section 690.12 in the code edition your authority having jurisdiction (AHJ) has adopted. Confirm which method the inverter supports: module-level power electronics, or a listed rapid-shutdown device.
- DC input fit. Number of MPPTs, maximum DC voltage and input current must work with your module count and string design at your site’s coldest temperatures.
- Batteries and backup. For hybrid systems, use the manufacturer’s compatible-battery list, and check whether backup needs extra hardware such as a gateway, transfer switch or load center.
- Monitoring and commissioning. Check what the installer app, communication hardware and site connectivity require.
- Warranty. Terms, registration steps and the claims process are set by the manufacturer for each model and region. Get the current U.S. warranty document for the exact model.
3. What “wholesale” really includes
The unit price is only part of a wholesale order. Before comparing suppliers, make sure every quote you receive covers the same things:
- The exact model numbers and quantities, including required accessories such as cables, gateways, rapid-shutdown devices and mounting hardware.
- Freight to your site or warehouse: how the order ships, whether you need liftgate or a delivery appointment, and the ship-to ZIP code.
- Lead time: supply varies by model, so get availability confirmed for your quantity before you commit the project schedule.
- Payment timing: when payment is due relative to confirmation of stock, freight and delivery.
At CSE Solar USA you can order online or ask for a quote first. When you choose Submit Order Request — Payment After Review at checkout, no credit card or payment information is collected at that stage; our team reviews your order and contacts you to complete payment securely. Shipping is shown at checkout as a calculated rate or local pickup for most items; some freight items show Freight Shipping: Quote Required instead. For project quantities, asking for a quote first is usually the fastest route.
4. Examples from the CSE catalog
CSE Solar USA carries inverters from manufacturers including SMA, SolarEdge, Enphase, Fronius, Hoymiles, Growatt, Sol-Ark, Fortress Power and APsystems. A few examples by project type:
| Model | Type (per manufacturer document) | Manufacturer document | Listed price* |
|---|---|---|---|
| Enphase IQ8P-3P-72-E-US | Commercial microinverter for 208Y V three-phase systems | Enphase datasheet | $174.00 |
| Hoymiles HM-1500NT | 4-in-1 single-phase microinverter (240 V / 208 V) | Hoymiles product page & datasheet | $381.50 |
| Growatt MIN 3800TL-XH-US | 3.8 kW single-phase grid-tie inverter, battery-ready. Backup requires a compatible battery (Growatt APX/ARO or listed LG models) plus Growatt’s SYN200-US for whole-home or ATS-US for partial-home backup, depending on the inverter version. | Growatt datasheet | $1,089.00 |
| Fronius Primo GEN24 10 kW (208–240 V) | Single-phase hybrid inverter, 208–240 V. Without a battery, PV Point gives basic backup from one designated socket while the sun is shining; Full Backup requires a battery and a switching device for safe grid disconnection. | Fronius technical data | $2,949.00 |
| Fortress Power Envy 10 kW | Hybrid inverter, 10 kW at 240 V, for 48 V batteries. Batteries are separate; Fortress lists eFlex, eFlex MAX, eVault MAX and LFP-10 MAX as compatible. | Fortress Power product page & datasheet | $3,963.00 |
| SMA Sunny Highpower PEAK3 125 kW | 125 kW three-phase inverter, 480 V, for large commercial and utility-scale arrays | SMA datasheet | $11,499.99 |
*Price listed on csesolarusa.com on October 14, 2026, per unit, before freight and applicable tax. Prices and availability change; your quote confirms both.
Backup power: a hybrid or battery-ready inverter is not a complete backup system on its own. Batteries and any required backup or switching hardware are separate items. Ask us to quote the complete system for your backup needs.
5. How to request a project quote
Send us the following and we will come back with equipment, freight and lead time in one quote:
- Inverter model numbers (or the system size, service voltage and phase if you would like us to suggest options), plus quantities
- Modules and batteries you are pairing them with
- Ship-to ZIP code and delivery access: loading dock, forklift, or liftgate needed
- Your timeline, and whether this is one project or recurring supply
- Resale or tax-exemption certificate, if applicable
Get a wholesale inverter quote
Email in**@*********sa.com, call 702-608-8385, or send your project details through our contact form.
FAQ
Do you offer pricing for multiple units or projects?
Yes. Multi-unit and project orders are quoted individually. Send the model numbers and quantities and we will quote equipment and freight together.
How does payment work?
When you choose Submit Order Request — Payment After Review at checkout, no credit card or payment information is collected at that stage; our team reviews your order and contacts you to complete payment securely. For quoted project orders, ask about payment when you request your quote.
Can you ship to my job site?
Yes. We quote freight to your site or warehouse; tell us the ZIP code and what equipment is available to unload.
Sources
- NFPA 70, National Electrical Code (rapid shutdown, section 690.12): nfpa.org
- UL 1741, Standard for Inverters, Converters, Controllers and Interconnection System Equipment for Use With Distributed Energy Resources: UL Standards
- IEEE 1547-2018, Standard for Interconnection and Interoperability of Distributed Energy Resources: IEEE SA
- Model specifications: the manufacturer documents linked in the table above; your utility’s interconnection handbook states which listing edition applies
